Flat immersion heater - Assembly type F with feet, to keep liquid storage tanks from freezing
- "All plastic" model
- Recommended from 6 kW on
- To keep any liquid storage tanks from freezing
- Installation through the inspection trap (ø 500 mm minimum)
Can be installed in a tank filled when support feet are ordered on each side of the heating part. On request for a complete efficiency : a cable-gland installed on the non heating part and a PT100 probe (coated Teflon® FEP) mounted on the heater
Galvatherm® Assembly type F
On a plastic rod frame PVDF or PP.
Feet : PP or PVDF.
Standard configuration : heating cable coated Teflon® FEP and PP or PVDF rod frame
For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.
Options and accessories
Extra length of cables
Electrical cable C of type HO5 VV-F or HO7 RN-F. Non heating cable N to go out of the tank.
Cable-gland, Ø75 mm
ref in PP : PEPP
ref in PVDF : PEPF
Feet for F
ref in PP : PIPP
ref in PVDF : PIPF
PT100 probe / Teflon® coated
Closed tanks : the probe goes through the same cable-gland as the one of the heater
General technical data sheets :