Flat immersion heater - Assembly type A with feet

Back to product list
  • Power from 0,5 kW to 15 kW
  • Polyvalent
  • Minimum bulk
  • Quick to install

Models adapted to all classical tank configurations and offering a large exchange surface in a minimum bulk. Recommended up to 6 kW.

 

Assembly type A
On metallic frame coated PP, PVDF, FEP or stainless steel frame
Feet : PP, PVDF, PTFE or stainless steel.

 

Standard configuration : heating cable coated Teflon® FEP and metallic frame coated PP or PVDF.
For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.

Options and accessories

Feet for A

For installation at the bottom of the tank, feet in PP or PVDF (standard height 50 mm) ref in PP : PIPP, ref in PVDF : PIPF

Removable guards for A

Perforated plastic guard in PP or PVDF. ref in PP : PRPPP,  ref in PVDF : PRPPF

Extra length of cables

Electrical cable C of type HO5 VV-F or HO7 RN-F. Non heating cable N to go out of the tank.

Cable-gland, Ø75 mm

Allow 300 mm extra on the H length (H=installation height on N)
ref in PP : PEPP
ref in PVDF : PEPF

produits par

technical

General technical data sheets :