Level probes - Conductive level rod-probes NS/NT

Back to product list
  • Control of the maximum & the minimum levels
  • With 2 to 5 rods for detection of 1 to 4 levels
  • With or without an integrated temperature sensor

Enables safe control and monitoring of the liquid level in tanks with level rod-probes.

 

NS/NT
Level rod-probes operate on a conductive principle, which means that they can be used only in electrically conductive liquids (conductivity >10 μS). Since these are purely passive devices, suitable electronic controllers are needed (ETS100, ENR200/300).

Options and accessories

Mounting wrench SB for BC casing

Universal wrench

HB support for BC casing

Support screwed onto the tank rim, easy fitment of the terminal casing
For heaters with a maximum tube lengthof  800 mm
Material : PP

Mounting sleeve EM for BC casing

For space-saving fitting in supports or tank cross-beams drill-hole diameter from 87 to 90 mm - Material  : EPDM

Holding sleeve HM for BC casing

To fix the heater in the tank cross-beams, recommanded for liquids with high temperature or  with highly concentrated steam
drill-hole diameter from 70 to 76 mm
Material : EPDM

Mounting wrench SL for LC casing

To open the LC casing and the cable-gland

Mounting sleeve ML for LC casing

For space-saving fitting in supports or tank cross-beams
drill-hole diameter 63 mm
Material  : EPDM

HL support for LC casing

Support screwed onto the tank rim, easy fitment of the terminal casing
For heaters with LC casing
Material : PP

Terminal casing LC

Material red terminal casing : PP, réf. LC - Material white terminal casing : PVDF, réf. LC/L

Terminal casing BC

Material red terminal casing : PP, ref. BC
Material white terminal casing : PVDF, ref. BC/L

produits par

technical

General technical data sheets :